Which Molecule Carries And Places Amino Acids In The Correct Locations During Protein Synthesis?. (2025)

The solvent will flow to the top of the TLC plate and the chemicals identified on the silica plate will travel farther than expected if the TLC plate is left in the developing chamber for an extended period of time.

What occurs if TLC is left on for too long?

That might lead to inaccurate Rf readings and the close-together spots colliding. With tweezers, remove the plate, and as soon as you can, pencil in the solvent front line.

If you wait too long, it will fade and you won't have all the data you need to figure out the Rf values.

There is no way to tell where the line should be drawn because the solvent front reached the top.

learn more about Rf values refer

https://brainly.com/question/26639192

#SPJ4

Galvanic cells or voltaic cells can generate electricity through the use of a spontaneous reaction.

What is a Galvanic cell?

A galvanic cell or voltaic cell can be described as an electrochemical cell in which electricity is generated from spontaneous Oxidation-Reduction reactions.

A common apparatus consists of two different metals or electrodes, each immersed in different beakers containing their respective ion solution, They are connected by a salt bridge or a porous membrane.

Galvanic cells carry the spontaneous redox reactions but have been designed to harness the energy generated from the said reaction. The electromotive force of the cell can be defined as the difference between the half-cell potentials which are measured by the two electrodes in the electrolyte.

Learn more about Galvanic cells, here:
https://brainly.com/question/13031093

#SPJ1

The isotope of an atom containing 31 protons and 39 neutrons suddenly has two neutrons added to it. Isotope is created: is: Gallium-72.

What is isotope?

Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei), location in the periodic table, and chemical element but have distinct nucleon numbers (mass numbers) as a result of having a different number of neutrons in their nuclei. Although the chemical properties of each isotope of a given element are nearly identical, they differ in their atomic weights and physical characteristics.

The name "isotope" refers to the fact that different isotopes of a single element occupy the same position on the periodic table. The term "isotope" is derived from the Greek words isos ("equal") and topos ("place"), which together mean "the same place."

To learn more about isotope:

https://brainly.com/question/364529

#SP J4

In the nuclear equation, 222 86 radon becomes 4 2 helium plus blank. The characteristics of the missing particle are Z=84, A=218.

4 2 helium is also known as alpha(α) particle. Helium atom contains 2 protons and 2 neutrons in it. During the α-decay, atom transforms into the another atom with atomic number less than 2 and a mass number less than 4. The sum of the subscripts on both side of the equation should be same. Therefore, the α-decay of radon is shown as

222 86 Ra→218 84 Z+4 2 He

Therefore, element which shows atomic number 84 is polonium(Po).

Hence, the characteristics of the missing particles are Z=84, A=218. Therefore, third option is correct.

Your question is incomplete but the complete question is

222 86 Radon becomes 4 2 Helium plus blank. The characteristics of the missing particle are

Z = 84, A = 220

Z = 88, A = 218

Z = 84, A = 218

Z = 85, A = 220

To know more about alpha(α) decay

https://brainly.com/question/8313045

#SPJ4

0.6078 moles of sodium chloride are in 74 gm of the mixture.

Mixture of sand and Nacl = 74gm

48% by mass is Nacl

48% = mass of Nacl / Total mass of mixture

48% = mass of Nacl / 74gm

Mass of Nacl = 48% of 74gm

Mass of Nacl = 48/100*74gm

Mass of Nacl = 35.52gm

Actual mass of Nacl = 58.44 gm

SO, the molar mass of Nacl = 35.52 / 58.44

= 0.6078 moles

The molar mass of the chemical compound is defined as the mass of the sample of that compound divided by the amount of substance which is the number of moles in that sample.

To know more about molar mass click here:

https://brainly.com/question/12127540

]

#SPJ4

11.1 moles of CO2 are produced when 5.55 moles of ethane is burned in excess of oxygen

What is combustion reaction?

Burning, also known as combustion, is a high-temperature exothermic redox chemical process that occurs when an oxidant, typically atmospheric oxygen, reacts with a fuel (the reductant) to generate oxidized, frequently gaseous products in a mixture known as smoke. Fire does not always arise from combustion because a flame can only be seen when the chemicals being burned evaporate, but when it does, the flame serves as a distinctive indicator of the reaction.

The balanced equation for combustion of ethane is

2C2H6(g)+7O2(g)⟶4CO2(g)+6H2O(g)

According to this reaction it is understood that,

2 moles of carbon ethane produces 4 moles of CO2

So, 5.55 moles of ethane produces x moles of CO2

x= (5.55* 4) / 2= 11.1 moles

Hence, 11.1 moles of CO2 are produced when 5.55 moles of ethane is burned in excess of oxygen.

To know more about combustion reactions from the given link

https://brainly.com/question/13251946

#SPJ4

The decomposition of iron (III) hydrogen carbonate produce three different products namely iron (III) carbonate, water and carbon dioxide as in the balanced reaction written below:

[tex]\rm 2Fe(HCO_{3})_{3} \rightarrow Fe_{2}CO_{3} + 3 CO_{2} + 3H_{2}O[/tex]

What is decomposition reaction?

Decomposition reaction is a type of reaction in which a single reactant species decompose or break into its constituent compounds or elements. Decomposition reaction can be either exothermic or endothermic. The breaking of a strong bonds needs higher energy.

Iron (III) hydrogen carbonate is a metallic complex with the formula,

Fe (HCO₃)₃ where iron is in +3 oxidation state. Decomposition of iron hydrogen carbonate produces iron (III)carbonate, carbon dioxide and water.

As per the balanced reaction, 2 moles of iron hydrogen carbonate produce one mole of iron carbonate and 3 moles of carbon dioxide and water each.

To find more on decomposition reactions, refer here:

https://brainly.com/question/16987748

#SPJ1

(2R,3S), 2,3-dibromobutane (2R,3R), 2,3-dibromobutane Superposition of mirror images is not feasible yet stereoisomers can arise.

A superimposable mirror image can be created using (2R,4S)-2,4Dibromopentane.

Non-superimposable mirror-image versions of the 2,4dibromopentane ring (2R,4R).

What do you understand by Stereoisomerism?

Stereoisomerism, also known as spatial isomerism, is a type of isomerism used in stereochemistry in which molecules with identical chemical structures and order of linked atoms (constitution) change in the three-dimensional spatial orientations of their atoms. In contrast, structural isomers have the same chemical formula but have different bond arrangements or bond orders. Stereoisomers of one another's molecules, by definition, represent the same structural isomer.

What is a configurational stereoisomer?

A stereoisomer of a reference molecule that has the opposite configuration at a stereocenter is known as a configurational stereoisomer (e.g., R- vs S- or E- vs Z-). This indicates that only disrupting covalent bonds to the stereocenter, for as by inverting the configurations of some or all of the stereocenters in a compound, will allow configurational isomers to be interconverted.

Learn more about Stereoisomerism here:-

https://brainly.com/question/13265191

#SPJ4

It is important to note that the properties of the green gas of the sample can remain the same because the repeating groups of atoms that make up the sample have an identical quantity of atoms and an identical temperature.

What is green gas?

Greenhouse gases are defined as gases that absorb and emit radiant energy in the thermal infrared spectrum, causing the greenhouse effect. The following according to scientific studies account for the primary or key greenhouse gases in the atmosphere of the earth:

Water vaporcarbon dioxidemethanenitrous oxide, and ozone

Note as well that one of the four basic forms in which matter exists is gas. A pure gas can be composed of individual atoms, elemental molecules composed of one kind of atom, or complex molecules composed of many atoms. A gas mixture, such as air, comprises a variety of pure gases.

Gas contracts when pressure is applied to it. When the pressure is discharged, expansion occurs with the gas.

Learn more about the properties of gas:
https://brainly.com/question/3450728
#SPJ1

Answer:69.8

Explanation:

Answer:

B

Explanation:

because I've just guessed and you've seen this but when you get this wrong and you see you'll wish you put that down

The pH of the solution is obtained is basic pH, it will change the color of Bromocresol from yellow to blue. Phenolphthalein is colorless in neutral and acidic solution but it gives basic pink color in basic solution.

What is pH?

pH of a solution is the measure of the H+ ion concentration. Mathematically it is negative logarithm of H+ ion or hydronium ion concentration. It measures how acidic or basic the solution is.

The pH of the solution is obtained as 12.2 and hence the solution is basic since pH above 7 is basic solutions. Bromocresol blue shows the color change from yellow to blue in the pH range of 3 - 5.4. Hence above a pH of 5.4 it shows blue color.

Phenolphthalein shows a color change from 8 - 9.5 pH range from colorless to pink. Hence, it gives pink color for the given solution.

Let MOH be the solution and when it dissociates in water it gives OH- ions as per the Arrhenius theory. Based on this theory we cannot say that it is monoprotic or diprotic ,however it flourish all the OH- ions to water.

[tex]\rm M_{x}OH_{y}\rightarrow xM^{+} + yOH^{-}[/tex]

To find more on pH, refer here:

http://brainly.com/question/491373

#SPJ1

Compound a is a primary amine compound b is a secondary amine compound c is a tertiary amine the common name for the amine d is ammonia

Amines are the organic compound that contain nitrogen atom with a lone pair and they are derived from ammonia means NH₃ in which one or more hydrogen atom is replaced by an alkyl or aryl group and they are known as alkylamines and arylamines

Primary amines are formed when one hydrogen atom in ammonia is substituted by an alkyl or aromatic group and secondary amine have two carbon bonded to the nitrogen and tertiary amines have the three carbon bonded to the nitrogen and ammonia is the gas made up of nitrogen and hydrogen

Know more about common name

https://brainly.com/question/3567414
#SPJ4

In a hypotonic solution, water will move inside the cell, causing the cell to swell and burst.

Hypotonic solution refers to a solution that contains a lower amount of solute when compared to the solute concentration of other solutions, in a semipermeable membrane. Such kind of solutions basically have less solute concentration and water basically moves inside the cell membrane.

In hypotonic solutions, there is a net movement of the water from the solution into the body. Due to which if we place a cell in a hypotonic solution then that cell will start swelling up as the water is entering the cell and eventually it will burst out. And this process is called as cytolysis.

To know more about hypotonic solutions

https://brainly.com/question/28944965

#SPJ4

HSO⁻³ is an amphoteric substance (in this reactions is ion that can react both as an acid and as a base).

What is dissociation constant?

The law of mass action, which defines equilibria in a more comprehensive fashion, has an immediate consequence called the dissociation constant. When speaking of salts, the ionization constant is another name for the dissociation constant. The term "association constant" refers to the inverse of the dissociation constant.

Kb is short for base dissociation constant. It is explained as the degree of base dissociation in solution.

Acid dissociation constant is referred to as Ka. It displays the degree of dissociation of an acid in a solution.

When HSO₃⁻ acts as acid, it gives protons to water:

HSO₃⁻(aq) + H₂O(l) ⇄SO₄²⁻(aq) + H₃O⁺(aq).

Ka = [SO₄²⁻] · [H₃O⁺] / [HSO₃⁻].

When HSO₃⁻ acts as base, it accepts protons from water:

HSO₃⁻(aq) + H₂O(l) ⇄ H₂SO₄(aq) + OH⁻(aq).

Kb = [H₂SO₄] · [OH⁻] / [HSO₃⁻].

Learn more about acid dissociation constants visit: brainly.com/question/4070332

#SPJ4

Answer:

What is the BEST explanation for why ionization energy generally increases left to right across the periodic table?

D There are more protons as the atomic number increases in a period, increasing the effective nuclear charge.

The statement of option D correctly explains the reason for increase of IE towards right in a period. As the effective nuclear charge increases the electrons are strongly attracted and hence more energy is needed to remove them, hence IE is higher. Thus answer is option D

The percent of a present amount of radioactive radium after 100 years is 95.76%

Radium:

Radium is a chemical element with the symbol Ra. It is the sixth element in the Group 2 of the periodic table. Pure radium is silvery-white in color, but it combines with nitrogen readily on exposure to air and forms a black surface layer of radium nitride.

Here we have to find the percent of the present amount of radioactive radium remains after 100 years.

As we know:

y = a[tex]e^{-bt}[/tex]

y = a (at t =0)

as half-life:

0.5a = a[tex]e^{1600b}[/tex]

ln 0.5 = -1699b

b = -log 0.5/ 1600

Now model is:

y = a[tex]e^{log 0.5/1600 t}[/tex][tex]e^{log 0.5 / 1600 t}[/tex]

at t = 100

y = 0.95768

So there will be 95.76% radioactive radium after 100 years.

To know more about radium refer to the link given below:

https://brainly.com/question/2378297

#SPJ4

Answer:

Explanation:

The distance at which the lowest potential energy is reached and the distance at which positive charges are least repellent are used to calculate bond length.

What do you mean by bond length?

The distance between the centers of two covalently bonded atoms is referred to as the bond length. The quantity of bound electrons determines how long the bond will be (the bond order).

The attraction between the two atoms is stronger and the bond length is shorter the higher the bond order. The covalent radii of the two atoms are typically added together to determine the length of the connection between them.

Picometers are used to measure bond length. Consequently, bond length grows in the following order: Triple bonds are made up of two bonds and one bond.

To know more about bond length, visit:

https://brainly.com/question/28943437

#SPJ4

No, work is not done whenever you hold a heavy object for a long time

What is work done ?

The result of a force's displacement and its component of force exerted by the object in the direction of displacement is what is known as the force's work. When we push a block with some force, the body moves quickly and work is completed.

No work, as that term is used here, is done until the object is moved in some way and a component of the force travels along the path that the object is moved. Because there is no displacement when holding a heavy object still, energy is not transferred to it.

Learn more about Work done here:

https://brainly.com/question/25573309

#SPJ4

The four sections of the pivot table—Report Filter, Column Labeling, Row Labels, and Values—are located at the bottom of the Self - configuration Field List window.

What are pivot tables and how do they function?

One of the fundamental tools for data is the pivot table. Many significant business concerns can be swiftly resolved with pivot tables.

Pivot Tables can be thought of as a form of visual storytelling even if they are merely tables and lack real graphics.

Can two Pivot Tables be combined?

Most tools demand the somewhat tedious process when comparing two Table or merging them. With some exclusions, like Lumeer, numerous Pivot Table that have the same structure can be laid over.

To know more about Pivot table visit:

https://brainly.com/question/25583535

#SPJ4

Oxaloacetate will accumulate and citrate will decrease.

Every cell in the human body contains the energy metabolite oxaloacetate. It plays a crucial role in the Krebs Cycle in the mitochondria, which powers the cells. It is also a crucial precursor metabolite in the process of gluconeogenesis, which produces glucose for the heart and brain when blood sugar levels are low.

Pyruvate is carboxylated to form oxaloacetate (OAA). Adenosine triphosphate is used in this reaction, which needs energy to proceed (ATP).

Daikon radish, sacred lotus, cucurbita (gourd), and tarragon are some foods that contain oxalacetic acid, which makes it a potential biomarker for the consumption of these foods.

Learn more about Oxaloacetate:

https://brainly.com/question/21990765

#SPJ4

A student has a solution of sodium nitrate and believes it is saturated. The statement provides the best evidence that the solution is saturated is: "When additional sodium nitrate is added, it all settles to the bottom of the container." (Option D)

What is sodium nitrate?

The chemical compound with the formula NaNO 3 is sodium nitrate. To differentiate it from regular saltpeter, potassium nitrate, this alkali metal nitrate salt is sometimes known as Chile saltpeter. Nitratine, nitrate, and soda niter are all names for the mineral form.

If more solute is added and it still does not dissolve, the original solution has become saturated. If the solute supplied dissolves, the previous solution was unsaturated.

A saturated solution is a chemical solution with the maximum level of bound solvent. The excess solution will not dissolve in a saturated solution. The amount of fluid that can be added to a solvent to form a saturated solution depends on a variety of variables.

Learn more about sodium nitrate:
https://brainly.com/question/13645492

#SPJ1

To obtain sand and water from mixture filtration process will be used.

To obtain salt from water in mixture crystallization will be done.

What are physical methods of separation?

A mixture is a substance formed by combining two or more different substances (elements or compounds), not necessarily in specific proportions. In a mixture, the components are not chemically combined (no chemical reactions occur). No chemical reactions take place, so the ingredients retain their original properties. There is no loss or gain of energy in forming the mixture. Using physical methods, the components of a mixture can be easily separated.

Mixtures are created by physical changes. Therefore, to separate the components of a mixture, certain physical methods or techniques can be used to separate the mixture into its original components. These techniques are based on the physical properties of the components such as density, weight and size.

To know more about physical methods visit:

https://brainly.com/question/5176461

#SPJ4

The molarity of a solution of nitric acid if 0.216g of barium hydroxide is 0.1715 M.

Molarity (M) is the quantity of a substance in a sure volume of answer. Molarity is defined as the moles of a solute according to liters of a solution. Molarity is likewise referred to as the molar attention of an answer.

Given;

mass = 0.216

volume = 20 ml = 0.02L

The molar mass of nitric acid = 63

moles = mass/molar mass

= 0.216/63

= 3.43

= 0.00343

Molarity = moles/volume

= 0.00343/0.02

= 0.1715

Molar concentration is the degree of the concentration of a chemical species, especially of a solute in a solution, in terms of the amount of substance in keeping with the unit volume of the solution. In chemistry, the most usually used unit for molarity is the number of moles in step with liter, having the unit image mol/L or mol/dm³ in SI unit.

Learn more about molarity here:-https://brainly.com/question/26756988

#SPJ4

The molecular formula is C6H12O6.

Solution:

1. Molar composition

Base: 100 g

C: 40.00 g / 12.0 g /mol = 3.333 mol

H: 6.72 g / 1 g/mol = 6.72 mol

O: 53.28 g / 16g/mol = 3.33 mol

2. Divide by the smaller number of moles

C: 3.333 / 3.33 = 1.00

H: 6.72 / 3.33 = 2.02 ≈ 2

O: 3.33/3.33 = 1.00

3. Empirical formula

CH2O

molar mass of the empirical formula = 12 g/mol + 2*1g/mol + 16 g/mol = 30 g/,ol

4. Number of times that the mass of the empirical formula is contained in the molar mass = 180 g/mol / 30 g/mol = 6

5. Molecular formula = 6 times the empirical formula

= C6H12O6

Compare structural formulas to chemical formulas that give the total number of atoms of each element in each molecule of a substance. A formula that indicates the actual number of atoms of an element present in a molecule of a substance. Example The molecular formula for ammonia gas is NH3.

This indicates that one molecule of ammonia gas contains one nitrogen atom and three hydrogen atoms. A molecular formula is a representation of the number of atoms in each element in the molecule of a compound. The definition of the molecular formula is the formula that gives the actual number of each atom in the molecule.

Learn more about The molecular formula here:- https://brainly.com/question/26388921

#SPJ4

The entire reaction equation for the thermal decomposition of (CaC2)[tex]O^{4}[/tex]. [tex]H_{2}O[/tex] is shown below. to make calcium oxalate that is anhydrous.

Water is lost by crystallisation in step 1. Step 2 involves converting calcium oxalate thermally to calcium carbonate while releasing carbon monoxide.

They can be categorised as calcium oxalate if they are insoluble in caustic alkali and acetic acid, soluble in hydrochloric and sulfuric acid without effervescence, and show a progressive separation of needle-like calcium sulphate crystal when mixed in a 50% sulfuric acid solution.

It burns in pure oxygen or air to form the oxide and reacts quickly with warm water to create calcium hydroxide and hydrogen gas (and more slowly with cold water). Calcium reacts when heated with boron, carbon, sulphur, phosphorus, halogens, and hydrogen.

Learn more about decomposition:

https://brainly.com/question/27300160

#SPJ4

The atomic number states the number of protons, so the number of protons in the element silicon is 14.

Atomic Structure

Atoms are made up of subatomic particles namely protons, electrons and neutrons. In an atom the three particles have a certain amount.

Protons are particles that make up atoms that are positively charged and have a mass as large as that of hydrogen, which is 1.67262 x 10⁻²⁷ kg or 1,836 times heavier than electrons. Protons are so deep in the atomic nucleus that they cannot be disturbed by particles outside the atom.

The element silicon (Si) has an atomic number = 14 and a mass number = 28

So that the number of subatomic particles is:

The number of protons = atomic number

= 14

Learn more about protons here: https://brainly.com/question/1805828

#SPJ4

The volume of the solution is obtained as 124mL.

What is the required volume of KI?

We know that this problem has to do with the stoichiometry of the reaction. In this case, we have the reaction that is occurring between the potassium iodide solution and the copper II nitrate solution.

First of all let us look at the balanced reaction equation which is written as;

2 Cu(NO₃)₂(aq) + 4 KI(aq) → 2 CuI(aq) + I₂(s) + 4 KNO₃(aq)

Number of moles of the Cu(NO₃)₂ reacted = 2.43 g/188 g/mol = 0.013 moles

If 2 moles of Cu(NO₃)₂ would have to react with 4 moles of KI

0.013 moles moles of Cu(NO₃)₂ would have to react with 0.013 * 4/2

= 0.026 moles

Given that;

Number of moles = concentration * volume

Concentration of KI = 0.209 M

Volume =Number of moles /Concentration

= 0.026 moles/0.209 M

= 0.124 L or 124mL

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

If two sounds have different waveforms, they can sound different despite having the same amplitudes.

What purposes do waveforms serve?

A waveform is only a graphic that aids in our comprehension of sound waves. They track the movement of one air molecule over time. We can change a waveform's amplitude to produce it louder or quieter, and we are able change a waveform's frequency to change the pitch.

What is measured by a waveform?

A unique kind of oscilloscope utilized in television applications is called a waveform monitor. Usually, it is used to gauge and show the voltage or level of a video stream in relation to time.

To know more about waveforms visit :

https://brainly.com/question/29354071

#SPJ4